INNOVATIVE TRAFFIC SOLUTIONS INC.

1-877-880-5872

Product

Monitors

ITS supplies Reno A&E and EDI NEMA and 170/2070 Conflict Monitor Units (CMU) and Malfunction Management Units (MMU).

Model MMU2-1600GE Monitor

The MMU2-1600GE can be programmed for eight phase, dual ring operations by answering a series of questions presented by the monitor. The Wizard can setup the 8 Flashing Yellow Arrow Types (A-H) defined
by the NEMA Amendment 4-2012. The Wizard can set up 8 additional Flashing Yellow Arrow Types (I-P). The Wizard will set the proper configurations and check the program card jumpers for any configuration issues.
Selecting the EASY FYA PROGRAMMING minimizes adding junpers to the program card. The MMU2-1600GE has a two year warranty based on the time powered up or five years from the date of manufacture. Warranty will not expire while the unit is on the shelf.
Data Sheet PDF Ask an Expert?
click here

Reno A&E MMU-1600GE

Malfunction Management Unit, OLED Display, Ethernet

The Model MMU-1600GE Malfunction Management Unit is a full featured unit that monitors up to 16 traffic signal channels for conflicting inputs, improper sequencing, incorrect timing, and invalid voltage levels.
The MMU-1600GE is fully compliant with NEMA Standard TS 2-2003. The MMU-1600GE can operate in either Type 16 mode (sixteen channels) or Type 12 mode (twelve channels). When configured to operate in Type 12 mode, the unit is downward compatible with NEMA Standard TS 1-1989. The MMU-1600GE features an Organic light Emitting Diode (OLED) display that sets a new standard for user-friendly monitor configuration
Data Sheet PDF Ask an Expert?
click here

Reno A&E MMU-1600D Conflict Monitor

The Model MMU-1600D Malfunction Management Unit is a fully featured unit that monitors up to 16 traffic signal channels for conflicting inputs, improper sequencing, incorrect timing, and invalid voltage levels.  

The MMU-1600D is fully compliant with NEMA Standard TS 2-2003. The MMU-1600D can operate in either Type 16 mode (sixteen channels) or Type 12 mode (twelve channels). When configured to operate in Type 12 mode, the unit is downward compatible with NEMA Standard TS 1-1989.
Data Sheet PDF Ask an Expert?
click here

EDI MMU-16LE(ip) SmartMonitor

 The MMU-16LE SmartMonitor® series Malfunction Management Unit (MMU) exceeds all the requirements set forth in the NEMA Standard TS2-2003, Part 4. The model MMU-16LE includes two large area Liquid Crystal Displays (LCD) for a continuous Full Intersection display. A separate graphical LCD provides a menu driven interface to status, signal voltages, configuration, event logs, and the integrated context sensitive Help System. The built-in Setup Wizard ensures that the enhanced monitor programming is done quickly and accurately, even by a novice. The industry first Diagnostic Wizard automatically pinpoints malfunctioning signals and offers trouble shooting advice.
  • MMU-16LEip: 12/16 channel with Ethernet Port
  • MMU-16LE: 12/16 channel with EIA-232 Port
Data Sheet PDF Ask an Expert?
click here

EDI MMU2-16LE(ip) SmartMonitor

The MMU2-16LE SmartMonitor® series Malfunction Management Unit (MMU) exceeds all the requirements set forth in the NEMA Standard TS2-2003 (R2008), including NEMA Amendment #4-2012 for Flashing Yellow Arrow (MMU2). The MMU2-16LE series includes two large area Liquid Crystal Displays (LCD) for a continuous Full Intersection display. A separate graphical LCD provides a menu driven interface to status, signal voltages, configuration, event logs, and the integrated context sensitive Help System.

  • MMU2-16LEip SmartMonitor 12/16 channel LCD Series with Ethernet Port
  • MMU2-16LE SmartMonitor 12/16 channel LCD Series with EIA-232 Port
Data Sheet PDF Ask an Expert?
click here

EDI MMU-16E

The MMU-16E series Malfunction Management Units (MMU) exceed all the requirements set forth in the NEMA Standard TS2-2003 , Part 4. These units are intended to provide basic conflict and voltage monitoring for NEMA TS-2 traffic controller assemblies while maintaining downward compatibility with NEMA TS-1 assemblies.

  • MMU-16E: 12/16 channel with EIA-232 Port
Data Sheet PDF Ask an Expert?
click here

EDI SSM-6LE & SSM-12LE

  • The SSM-LE series Signal Monitors exceed all the requirements set forth in the NEMA Standard TS-1-1994, Part 6
  • These units are intended to provide enhanced conflict and voltage monitoring for traffic controller assemblies with additional capabilities for broader fault coverage and diagnostic troubleshooting
  • The SSM-6LE and SSM-12LE units include a Full Intersection Liquid Crystal display (LCD)
  • Communications port which is used to communicate with a Personal Computer using EDI ECcom™ software
  • Two modes of Flashing Yellow Arrow PPLT support are provided
Data Sheet PDF Ask an Expert?
click here

EDI 210C Series

The Model 210C meets all the requirements set forth in the Caltrans Traffic Signal Control Specifications. These units are intended to provide basic conflict and voltage monitoring for Type 170/179 traffic controller assemblies.

  • 210C: 16 channel
Data Sheet PDF Ask an Expert?
click here

EDI 210E

The model 210E meets all the requirements set forth in the Caltrans Traffic Signal Control Specifications and provides the enhanced functions of Red signal monitoring, Dual Indication monitoring and Clearance monitoring.

  • 210E: 16 channel
Data Sheet PDF Ask an Expert?
click here

EDI 2010 Series

The Model 2010 meets all the requirements set forth in the Caltrans Traffic Signal Control Specifications and provides the enhanced functions of Red signal monitoring, Dual Indication monitoring and Clearance monitoring. This model provides full compliance to the 2010 industry standard and is compatible with the 2070 Controller Unit.

  • 2010: 16 Channel with Red Monitoring
Data Sheet PDF Ask an Expert?
click here

EDI 2010ECL & 2010ECLip

The model 2010ECL is configured for operation with a 2070 Controller Unit in a 332 cabinet. It provides all the enhanced features of the ECL family, including broad fault coverage, full intersection display, advanced event logging and RMS voltage reporting. The 2010ECL series monitor is compatible with 170, 179 and 2070 Controller Units. This unit includes support for Flashing Yellow Arrow operation.

  • 2010ECLip: 16 channel with Ethernet Port
  • 2010ECL: 16 channel with EIA-232 Port
Data Sheet PDF Ask an Expert?
click here

EDI 2018ECL & 2018ECLip

The model 2018ECL is configured for operation with a 2070 Controller Unit in a 332 cabinet. It provides all the features of the 2010ECL model but with expanded 18 channels of monitoring. The 2018ECL series monitor is compatible with 170, 179 and 2070 Controller Units. This unit includes support for Flashing Yellow Arrow operation.

  • 2018ECLip: 18 channel with Ethernet Port
  • 2018ECL: 18 channel with EIA-232Port
Data Sheet PDF Ask an Expert?
click here

EDI 2018KCL & 2018KCLip

The model 2018KCL is configured with a removable Datakey memory device that contains all the monitor set-up information and completely eliminates the need for a diode Program Card, soldered jumpers and DIP switches .

  • 2018KCLip: 18 channel with Datakey and Ethernet Port
  • 2018KCL: 18 channel with Datakey and EIA-232 Port
Data Sheet PDF Ask an Expert?
click here

Reno A&E – 2018 CMU

Reno A&E’s Model 2018 Conflict Monitor is the first 170 / 2070 compatible monitor to include features that simplify monitoring of complex intersections. The Model 2018 sets new standards in reliability and functionality by providing enhanced monitoring functions,event logging capability, database management, and advanced diagnostic features. Reno A&E’s Model 2018 meets the requirements set forth in Chapter 3, Section 6, of the Caltrans Transportation Electrical Equipment Specifications (TEES) dated 08/16/02.

Data Sheet PDF Ask an Expert?
click here

All rights reserved®Innovative Traffic Solutions Inc.

1