Category Archives: Inductive Loops

LM602

LM602 – EDI

Two channel rack mount detector with 15 levels of sensitivity, four loop frequencies, three modes of operation. DIP switch front panel controls

Listed on MTO DSM (Designated Sources for Material)

  • LM602: Solid State output
  • LM602R: Relay outputs
LM222

LM222 – EDI

Two channel rack mount detector with 8 levels of sensitivity, four loop frequencies, three modes of operations. DIP switch front panel.

Listed on Caltrans QPL.

  • LM222: Solid State outputs
LMD222

LMD222 – EDI

Two channel rack mount detector with DEFLECTOMETER, four loop frequencies, three modes of operation. Caltrans 332 Cabinet compatible specifications but with push-button DEFLECTOMETER user interface.

  • LMD222: Solid State outputs
oracle-4e

Oracle 4E – EDI

Four channel rack mount detector with LCD Display, 20 levels of sensitivity, eight loop frequencies, three modes of operation.

  • Oracle 4E : Solid State output
  • Oracle 4EC : Solid State outputs with AccurateCount and Micro-Probe mode
Oracle-2e

Oracle 2E – EDI

Two channel rack mount detector with LCD Display, 20 levels of sensitivity, eight loop frequencies, three modes of operation.

  • Oracle 2E : Solid State fail-safe outputs
  • Oracle 2EC : Solid State fail-safe outputs with AccurateCount and Micro-probe mode
ModelC1000vehdec

Model C-1000 Vehicle Detector Series – Reno A&E

Two Channel, Rack Mount, Back-lit LCD Display

The Model C-1000 series consists of detectors designed to meet or exceed NEMA Standards TS 2-1992 for Type C detectors. These units are downward compatible to NEMA Standards TS 1-1989. In addition, the Model C-1000 series includes versions that are designed for use in Type 332 / 170 applications.
The C-1000 detector is a two channel, card rack type loop detector with individual channel detect and loop fail indications provided via
two high intensity red LEDs and an easy to read LCD screen. All detector settings and parameters are configured using a set of four pushbuttons and the LCD screen.
The C-1000 offers advanced features providing built-in diagnostic capabilities all of which are viewable by means of the LCD screen.
These include:
1.) realtime loop frequency
2.) loop inductance and -?L/L%
3.) a bargraph indication of relative inductance change
(which ensures proper selection of sensitivity level)
4.) a record of accumulated loop failures
5.) a timer countdown of programmed timing functions.
Model E-2 1500

Model E/2-1500 Series – Reno A&E

Vehicle Detector, Four Channels, Rack Mount

The E/2-1500 detector is a four channel card rack loop detector with an easy to read LCD screen and individual channel detect and loop fail indications provided via four high intensity red LEDs.
All detector settings and parameters are programmed using four pushbutton switches and the LCD screen.
The E/2-1500 offers advanced features providing built-in diagnostic capabilities viewable on the LCD screen. These include:
1.) loop frequency
2.) loop inductance
3.) loop inductance change (-?L/L%)
4.) a bargraph indication of relative inductance change
5.) accumulated number of loop failures.
Model C-1100-B-C-1200-B

Bicycle Detector C-1100-B / C-1200-B Series – Reno A&E

Bicycle Detector, Two Channel, Rack Mount, Back-lit LCD Display

The Model C-1100-B and C-1200-B are designed to detect all vehicles with the added ability of differentiating bicycles from all other vehicles.

 
This allows the traffic engineer to detect and provide safe passage time for bicycles without compromising the intersection’s operating efficiency. 
 
The unique capability to identify bicycles from other vehicles allows the user to program initial time and extension time for bicycles only, thus providing a safe passage time through the intersection. When a bicycle is detected passing through the bicycle loop (see Datasheet for recommended bicycle loop geometries) the channel’s output is latched in the call state.
222S Series

Model 222S – Reno A&E

The Model 222S is a two channel, card rack type loop detector. It is designed for use in installations requiring a Type 332 / 170 detector. The Model 222S incorporates a three position Call / Test switch for each channel that can be used to simulate a continuous or momentary Call output. This feature is useful when troubleshooting
problems related to detector outputs and / or controller inputs.

222

Model 222 – Reno A&E

The Model 222 is a California Department of Transportation (Caltrans) and MTO approved vehicle detector. Model 222
detectors are two channel, DIP switch programmable, card rack type loop detectors with individual channel detect and loop fail indications provided via two dual color, high intensity LEDs.

Listed on MTO DSM (Designated Sources for Material)